Dr. Liang began at Tech in 1990 as an assistant professor. Previously, he was an assistant professor at Oklahoma State University. He was named to the Bryan Professorship in 2005. He was President of Walsin-Lihwa Corporation in 2008-2010.

Seung Woo Lee joined the Woodruff School of Mechanical Engineering at the Georgia Institute of Technology as an assistant professor in January of 2013. Lee received his Ph.D. in chemical engineering at MIT, focusing on designing high-energy and high-power density nanostructured electrodes for electrochemical energy storage devices, and synthesizing catalysts for electrochemical energy conversion of small molecules such as methanol oxidation and O2 reduction. He conducted his postdoctoral research in designing electrodes for lithium rechargeable batteries and catalysts for solar energy storage in the Department of Mechanical Engineering and the Department of Chemistry at MIT.

In 1979 Dr. Lee conducted radiation research as an undergraduate assistant at the State University of New York at Buffalo, where he modeled and simulated the nongray particulate radiation in an isothermal cylindrical medium. At MIT, he designed high-performance fluidic amplifiers and fluid signal transmission systems and investigated analytically and experimentally the effects of temperature changes on fluid power control systems for flight backup control applications. Dr. Lee began at Tech in 1985 as an Assistant Professor.

Professor Kurfess began his academic career at Carnegie Mellon University where he rose to the rank of Associate Professor. In 1994, he moved to the Georgia Institute of Technology where he rose to the rank of Professor in the George W. Woodruff School of Mechanical Engineering. In 2005, he was named Professor and BMW Chair of Manufacturing in the Department of Mechanical Engineering at Clemson University’s International Center for Automotive Research. In 2012, he returned to Georgia Tech as a Professor of Mechanical Engineering and the HUSCO/Ramirez Distinguished Chair in Fluid Power and Motion Control.

During 2012-2013, Dr. Kurfess was on leave serving as the Assistant Director for Advanced Manufacturing at the Office of Science and Technology Policy in the Executive Office of the President of the United States of America. In this position he had responsibility for engaging the Federal sector and the greater scientific community to identify possible areas for policy actions related to manufacturing. He was responsible for coordinating Federal advanced manufacturing R&D, addressing issues related to technology commercialization, identifying gaps in current Federal R&D in advanced manufacturing, and developing strategies to address these gaps. During  2019-2021 he was on leave serving as the Chief Manufacturing Officer and the Founding Director for the Manufacturing Science Division at Oak Ridge National Laboratory, where he was responsible for strategic planning in advanced manufacturing.

Professor Kurfess has served as a special consultant of the United Nations to the Government of Malaysia in the area of applied mechatronics and manufacturing, and as a participating guest at the Lawrence Livermore National Laboratory in their Precision Engineering Program. He has testified in a number of patent cases, including testifying at the International Trade Commission (ITC). He is currently the President of the American Society of Mechanical Engineers (ASME) and also serves on the Board of Governors of ASME. He is the CTO of the National Center for Manufacturing Sciences (NCMS) and serves on its Board of Directors. He also serves on the Board of Directors for the National Center for Defense Manufacturing and Machining (NCDMM), and on the Board of Trustees of the MT Connect Institute. He served on the Board of Directors for the Society of Manufacturing Engineers (SME) and was the President of SME in 2018. He is an appointed member of the Department of Energy, National Nuclear Security Administration, Advisory Committee for Nuclear Security, and an appointed member of the Department of the Navy Science and Technology Board.

His research focuses on the design and development of advanced systems targeting the automotive sector (OEM and supplier) including vehicle and production systems. He has significant experience in high precision manufacturing and metrology systems. He has received numerous awards including a National Science Foundation (NSF) Young Investigator Award, an NSF Presidential Faculty Fellowship Award, the ASME Pi Tau Sigma Award, SME Young Manufacturing Engineer of the Year Award, the ASME Blackall Machine Tool and Gage Award, the ASME Gustus L. Larson Award, an ASME Swanson Federal Award, and the SME Education Award. He is an elected member of the National Academy of Engineering, and a Fellow of the AAAS, the SME and the ASME.

Satish Kumar is currently an Associate professor in the George W. Woodruff School of Mechanical Engineering at Georgia Tech. He joined Georgia Tech in 2009 as an Assistant Professor. Prior, he worked at IBM Corporation where he was responsible for the thermal management of electronic devices. Kumar received his Ph.D. in Mechanical Engineering and M.S. degree in Electrical and Computer Engineering from Purdue University, West Lafayette in 2007. He received his M.S. degree in Mechanical Engineering from Louisiana State University, Baton Rouge in 2003 and B.Tech. degree in Mechanical Engineering from the Indian Institute of Technology, Guwahati in 2001. His research interests are in electro-thermal transport in carbon nanotube, graphene, and 2D materials based electronic devices, AlGaN/GaN transistors, thermal management, and thermo-electric coolers. He is author or co-author of over 70 journal or conference publications. His contributions to his research field have been recognized by Purdue Research Foundation Fellowship in 2005, 1969 Teaching Fellow from Center for the Enhancement of Teaching and Learning Center at Georgia Tech, 2012 Summer Faculty Fellow from Air Force Research Lab, 2014 Sigma Xi Young Faculty Award, and 2014 DARPA Young Faculty Award.

Selected recent publications:

➤ Robert G. Mannino, Eric J. Nehl, Sarah Farmer, Amanda Foster Peagler, Maren C. Parsell, Viviana Claveria, David Ku, David S. Gottfried, Hang Chen, Wilbur A. Lam, and Oliver Brand, “The critical role of engineering in the rapid development of COVID-19 diagnostics: Lessons from the RADx Tech Test Verification Core” Science Advances. 9, eade4962 (2023). https://www.science.org/doi/10.1126/sciadv.ade4962

➤ Liu ZL, Bresette C, Aidun CK, Ku DN. (2021) SIPA in 10 milliseconds: VWF tentacles agglomerate and capture platelets under high shear. Blood Advances doi.org/10.1182/bloodadvances.2021005692

➤ Kim DJ, Ku DN. “Structure of shear-induced platelet aggregated clot formed in an in vitro arterial thrombosis model” Blood Adv (2022) 6 (9): 2872–2883. doi.org/10.1182/bloodadvances.2021006248

➤ Kim DJ, Bressette C, Liu Z, Ku DN. Occlusive thrombosis in arteries.  APL Bioengineering  2019;3, 041502. https://doi.org/10.1063/1.5115554

Licensed Patents: 

➤ Ku, D.N., Wootton, D.M., Greer-Braddon, L., “Poly(vinyl Alcohol) Cryogel,” No. 5,981,826 and 6,231,605, issued May 15, 2001. Licensed; created prosthetic cartilage; acquired by Wright Medical. $645 million

➤ Denoziere, G., Ku, D.N., “Methods of Producing PVA Hydrogel Implants and Related Devices,” issued U.S. Patent No. 8,038,920, Licensed to Mimedx.  Market cap >$600 million.

Shreyas Kousik is an assistant professor in the George W. Woodruff School of Mechanical Engineering. Previously, Shreyas was a postdoctoral scholar at Stanford University, working in the ASL under Prof. Marco. Kousik completed a postdoc with Prof. Grace Gao in the NAV Lab. He received his Ph.D. in Mechanical Engineering at the University of Michigan, advised by Prof. Ram Vasudevan in the ROAHM Lab and received his undergraduate degree in Mechanical Engineering at Georgia Tech, advised by Prof. Antonia Antoniou.

Kousik’s research is focused on guaranteeing safety in autonomy via collision avoidance methods for robots. His lab’s goal is to translate safety in math to safety on real robots by exploring ways to model uncertainty from autonomous perception and estimation systems and ensure that these models are practical for downstream planning and control tasks

Kim joined the Woodruff School of Mechanical Engineering as an Assistant Professor in July 2013. Prior to his current appointment, he was a Postdoctoral Associate in the David H. Koch Institute for Integrative Cancer Research at MIT, where he developed biomimetic microsystems for probing nanoparticle behaviors in the inflamed endothelium and for synthesizing therapeutic and diagnostic nanomaterials. His doctorate research at CMU focused on closed-loop microfluidic control systems for lab-on-a-chip applications to biochemistry and developmental biology. Prior to his Ph.D., he was a researcher in areas of dynamics, controls, and robotics at R&D Divisions of Hyundai-Kia Motors and Samsung Electronics for six years.

Surya Kalidindi is a Regents Professor, and Rae S. and Frank H. Neely Chair Professor in the Woodruff School of Mechanical Engineering at Georgia Institute of Technology, Georgia, USA with joint appointments in the School of Materials Science and Engineering as well as the School of Computational Science and Engineering. Surya earned a Ph.D. in Mechanical Engineering from Massachusetts Institute of Technology in 1992, and joined the Department of Materials Science and Engineering at Drexel University as an Assistant Professor. After twenty years at Drexel University, Surya moved into his current position at Georgia Tech. Surya’s research efforts have made seminal contributions to the fields of crystal plasticity, microstructure design, and materials informatics. Surya has been elected a Fellow of ASM International, TMS, and ASME. In 2016, he and his group members have been awarded the top prize as well as one of the runner-up prizes in the national Materials Science and Engineering Data Challenge sponsored by the Air Force Research Lab in partnership with the National Institute of Standards and Technology and the U.S. National Science Foundation. He has also been awarded the Alexander von Humboldt Research Award, the Vannever Bush Faculty Fellow, the Government of India’s Vajra Faculty Award, and the Khan International Award.

Kalaitzidou joined Georgia Tech as an assistant professor in the G.W. Woodruff School of Mechanical Engineering in November of 2007. She also holds an adjunct appointment in the School of Materials Science and Engineering. She obtained her Ph.D. in manufacturing and characterization of polymer nanocomposites (PNCs) from Michigan State University and worked as a post-doctoral researcher on mechanics of soft materials in the Polymer Science and Engineering Department at University of Massachusetts, Amherst. She was promoted to professor in 2019 and was also named a Rae S. and Frank H. Neely Professor in the same year. In November 2019 Kalaitzidou was named the Associate Chair for Faculty Development.