Melkote began at Tech in 1995 as an Assistant Professor. Prior to this, he was a Post-doctoral Research Associate at the University of Illinois at Urbana-Champaign where he conducted research in Machining and Machine Tools Systems in the group led by the Late Professor Richard E. DeVor and Professor Shiv G. Kapoor

Leon McGinnis is a Professor Emeritus in the Stewart School of Industrial & Systems Engineering at Georgia Tech. 

Dr. McGinnis's research focuses on fundamental representation issues in discrete event logistics systems, on performance assessment models, and on the development of integrated computational tools. He has been a leader in developing and administering industry-focused and interdisciplinary education and research programs at Georgia Tech. He helped establish the Material Handling Research Center in 1982 and managed one of five research programs over the next decade. He also helped establish the Computer Integrated Manufacturing Systems Program in 1983, which received a LEAD Award from ASME for excellence in graduate-level interdisciplinary manufacturing education, and served as Director from 1988 to 1998. As CIMS Director, he lead a team that competed for and won a $1 million TRP grant, resulting in the establishment of the Rapid Prototyping and Manufacturing Institute within the Manufacturing Research Center. In 1994, he led a team of Stewart School of Industrial & Systems Engineering faculty to win over $2 million in grants from the W. M. Keck Foundation to create the Keck Virtual Factory Lab as a focal point for IE systems design and control research.

The Institute of Industrial Engineers has recognized Dr. McGinnis with the Outstanding Publication Award, the David F. Baker Distinguished Research Award, and the Fellow Award. He has given the Inyong Ham Lecture at Penn State, the Jones Lecture at Dartmouth, and the Schantz Lectures at Lehigh. 

Dr. McGinnis enjoys teaching students how to think like industrial engineers, particularly in developing and using mathematical and computational models to support design of facilities and control systems. 

He received his BS in IE from Auburn University, and MS and PhD in IE from North Carolina State University. He is a registered Professional Engineer in the state of Georgia.

Regents' Professor and Carter N. Paden, Jr. Distinguished Chair in Metals Processing, Dave McDowell joined Georgia Tech in 1983 and holds a dual appointment in the GWW School of Mechanical Engineering and the School of Materials Science and Engineering. He served as Director of the Mechanical Properties Research Laboratory from 1992-2012. In 2012 he was named Founding Director of the Institute for Materials (IMaT), one of Georgia Tech's Interdisciplinary Research Institutes charged with fostering an innovation ecosystem for research and education. He has served as Executive Director of IMaT since 2013. McDowell's research focuses on nonlinear constitutive models for engineering materials, including cellular metallic materials, nonlinear and time dependent fracture mechanics, finite strain inelasticity and defect field mechanics, distributed damage evolution, constitutive relations and microstructure-sensitive computational approaches to deformation and damage of heterogeneous alloys, combined computational and experimental strategies for modeling high cycle fatigue in advanced engineering alloys, atomistic simulations of dislocation nucleation and mediation at grain boundaries, multiscale computational mechanics of materials ranging from atomistics to continuum, and systems-based computational materials design. A Fellow of SES, ASM International, ASME and AAM, McDowell is the recipient of the 1997 ASME Materials Division Nadai Award for career achievement and the 2008 Khan International Medal for lifelong contributions to the field of metal plasticity. McDowell currently serves on the editorial boards of several journals, and is co-Editor of the International Journal of Fatigue.

Dr. Mayor is a distinguished expert in thermal sciences, electro-mechanical machine design, and micro-manufacturing. As the inventor of the DwHX cooling technology for electric machines, he specializes in the research and development of advanced power electronics cooling, electric machine design, micro-power generation, and sustainable energy systems. Alongside his technical pursuits, Dr. Mayor has a rich entrepreneurial backdrop, having navigated product-oriented tech startups and led multiple advanced research and development programs. His expertise is sought in IP litigation, where he serves as a technical authority. 

He has presented keynotes and seminars on diverse topics, from micro-manufacturing and electric machines to energy systems. He teaches courses in mechanical engineering courses at Georgia Tech, including machine design, manufacturing processes, design thinking and internal combustion engines, including H2ICE, and has taught courses as a visiting lecturer in China, France, Saudi Arabia, and South Africa. He has a substantial academic contribution with over 120 publications in leading archival journals and conferences and is a member of ASME and IEEE and SME. 

Dr. Mayor's commitment goes beyond teaching and research as he engages in service as the Secretary of the Faculty. He strives to build on the learnings from the pandemic to expand the resourcefulness, understanding, and trust in shared governance. Moreover, Dr. Mayor serves as the faculty advisor for the Student Competition Center, further highlighting his commitment to student mentoring and leadership development. He looks forward to implementing AI in a robust manner in institute learnings, as a core capability in education.

Jye-Chyi (JC) Lu is a professor in in the Stewart School of Industrial and Systems Engineering (ISyE) at Georgia Tech (GT).

Dr. Lu is active in promoting research, education and extension-service programs with focus on engineering statistics and analytics areas. Dr. Lu received a Ph.D. in statistics from University of Wisconsin at Madison in 1988, and joined the statistics faculty of North Carolina State University, where he remained until 1999 when he joined GT-ISyE. He has 82 journal publications in engineering and statistics journals. Twenty seven Ph.D. students has graduated under his supervision.  His research has been supported by many NSF awards and industry grants. He serves as an associate editor (AE) for the Journal of Quality Technology and had served as AEs for Technometrics and IEEE Transactions on Reliability.  He is a Fellow in the American Statistical Association, and has been INFORMS Quality, Statistics and Reliability section chair.

Zhiqun Lin is currently Professor of Materials Science and Engineering at the Georgia Institute of Technology. His research focuses on nanostructured functional materials (NanoFM). An extensive list of materials currently under investigation in his group includes polymer-based nanocomposites, block copolymers, polymer blends, conjugated polymers, quantum dots (rods, tetrapods, wires), magnetic nanocrystals, metallic nanocrystals, semiconductor metal oxide nanocrystals, ferroelectric nanocrystals, multiferroic nanocrystals, upconversion nanocrystals, thermoelectric nancrystals, core/shell nanoparticles (nanorods), hollow nanocrystals, Janus nanocrystals, nanopores, nanotubes, hierarchically structured and assembled materials, and semiconductor organic-inorganic nanohybrids.

The goal of his research is to understand the fundamentals of these nanostructured materials. His group intends to create these nanostructures in a precisely controllable manner and to exploit the structure-property relationships in the development of multifunctional materials for potential use in energy conversion (e.g., solar cells, photocatalysis, and hydrogen generation) and storage (e.g., batteries), electronics, optics, optoelectronics, magnetic materials and devices, nanotechnology, and biotechnology.

Dr. Liang began at Tech in 1990 as an assistant professor. Previously, he was an assistant professor at Oklahoma State University. He was named to the Bryan Professorship in 2005. He was President of Walsin-Lihwa Corporation in 2008-2010.

Professor Kurfess began his academic career at Carnegie Mellon University where he rose to the rank of Associate Professor. In 1994, he moved to the Georgia Institute of Technology where he rose to the rank of Professor in the George W. Woodruff School of Mechanical Engineering. In 2005, he was named Professor and BMW Chair of Manufacturing in the Department of Mechanical Engineering at Clemson University’s International Center for Automotive Research. In 2012, he returned to Georgia Tech as a Professor of Mechanical Engineering and the HUSCO/Ramirez Distinguished Chair in Fluid Power and Motion Control.

During 2012-2013, Dr. Kurfess was on leave serving as the Assistant Director for Advanced Manufacturing at the Office of Science and Technology Policy in the Executive Office of the President of the United States of America. In this position he had responsibility for engaging the Federal sector and the greater scientific community to identify possible areas for policy actions related to manufacturing. He was responsible for coordinating Federal advanced manufacturing R&D, addressing issues related to technology commercialization, identifying gaps in current Federal R&D in advanced manufacturing, and developing strategies to address these gaps. During  2019-2021 he was on leave serving as the Chief Manufacturing Officer and the Founding Director for the Manufacturing Science Division at Oak Ridge National Laboratory, where he was responsible for strategic planning in advanced manufacturing.

Professor Kurfess has served as a special consultant of the United Nations to the Government of Malaysia in the area of applied mechatronics and manufacturing, and as a participating guest at the Lawrence Livermore National Laboratory in their Precision Engineering Program. He has testified in a number of patent cases, including testifying at the International Trade Commission (ITC). He is currently the President of the American Society of Mechanical Engineers (ASME) and also serves on the Board of Governors of ASME. He is the CTO of the National Center for Manufacturing Sciences (NCMS) and serves on its Board of Directors. He also serves on the Board of Directors for the National Center for Defense Manufacturing and Machining (NCDMM), and on the Board of Trustees of the MT Connect Institute. He served on the Board of Directors for the Society of Manufacturing Engineers (SME) and was the President of SME in 2018. He is an appointed member of the Department of Energy, National Nuclear Security Administration, Advisory Committee for Nuclear Security, and an appointed member of the Department of the Navy Science and Technology Board.

His research focuses on the design and development of advanced systems targeting the automotive sector (OEM and supplier) including vehicle and production systems. He has significant experience in high precision manufacturing and metrology systems. He has received numerous awards including a National Science Foundation (NSF) Young Investigator Award, an NSF Presidential Faculty Fellowship Award, the ASME Pi Tau Sigma Award, SME Young Manufacturing Engineer of the Year Award, the ASME Blackall Machine Tool and Gage Award, the ASME Gustus L. Larson Award, an ASME Swanson Federal Award, and the SME Education Award. He is an elected member of the National Academy of Engineering, and a Fellow of the AAAS, the SME and the ASME.